How To Repair Tub Drain

Sometimes bathtub drains don't drain as well as they should. Luckily, improving the seal and water menses is an easy task. Here, our bathtub installation experts share how to fix some of the most mutual bathtub drains:

What you'll need to gear up a bathtub drain:

• Screwdriver
• Wrench
• Brush
• White vinegar
• Blistering soda
• Hot water

Lift & Turn Drains

1. Beginning, utilise your screwdriver to loosen the screws on the overflow faceplate and remove.
2. After that, elevator upward the drain plug.
3. Next, locate the setscrew underneath the lip of the plug.
4. Loosen the setscrew and remove the plug.
5. Flush both the tub drain and overflow drain with a solution of one cup white vinegar and one cup baking soda.
6. Afterward 30 minutes, rinse with hot water.
7. Lastly, make clean and reinstall the overflow faceplate and the bleed plug.

Popular-Upward Drains

1. Get-go, use your screwdriver to loosen the screws on the overflow faceplate and remove.
2. Next, remove the trip lever and linkage from the bleed.
3. Afterward that, move the rocker arm then the drain is in the open up position.
4. Turn and jerk the assembly until it detaches from the drain.
5. Side by side, affluent both the tub drain and overflow drain with a solution of i cup white vinegar and one cup baking soda.
6. Later on 30 minutes, rinse with hot h2o.
7. Clean the linkage, rocker arm, and stopper with a brush and a mild cleaning solution.
8. Reinstall the faceplate, arm and stopper associates, and the trip lever and linkage.
9. If the bleed doesn't period well, loosen the locknut with your wrench.
10. Turn and lift the rod counterclockwise, so tighten the locknut.

Plunger Drains

1. First, use your screwdriver to loosen the screws on the overflow faceplate and remove.
2. Make sure your linkage and plunger are removed every bit well.
3. Side by side, employ a castor and a mild cleaning solution to clean the plunger and linkage.
4. After that, flush both the tub drain and overflow drain with a solution of one loving cup white vinegar and one cup blistering soda.
5. Afterward 30 minutes, rinse with hot water.
6. Clean and reinstall your linkage, plunger, overflow faceplate and bleed plug.
7. Check the drain past partially filling the tub and making certain the drain is sealed.
8. Next, open the drain and check the water flow.
9. If the drain allows water to seep out, utilise your wrench to loosen the locknut.
10. Turn and elevator the rod counterclockwise, then tighten the locknut.

Lever Drains

1. First, employ your screwdriver to loosen the screws on the trip lever faceplate and remove.
2. Make certain your linkage and plunger are removed as well.
3. Flush both the tub bleed and overflow bleed with a solution of one cup white vinegar and 1 cup baking soda.
4. After 30 minutes, rinse with hot water.
5. Clean and reinstall the plunger, linkage, and faceplate.
6. Check the drain past partially filling the tub and making certain the drain is sealed.
7. Next, open up the bleed and bank check the h2o flow.
8. If the bleed allows h2o to seep out, use your wrench to loosen the locknut.
9. Turn and elevator the rod counterclockwise, and so tighten the locknut.

Foot-Lock or Roller Ball Drains

1. First, employ your screwdriver to loosen the screws on the overflow faceplate and remove.
2. Next, rotate your bleed plug counterclockwise until information technology tin can be easily removed.
3. Flush both the tub drain and overflow drain with a solution of i cup white vinegar and one cup baking soda.
4. After 30 minutes, rinse with hot water.
5. Clean and reinstall the overflow faceplate and the drain plug.

Source: https://www.pjfitz.com/diy/bathtub-maintenance/fix-bathtub-drain/

Posted by: jacobsfitain.blogspot.com

Share this post